00063757.DOC, Version 1.0
20/28
Making the connections
If the PA system is turned on, turn it off before making any connection.
1
The speaker system is equipped with lockable Speaker sockets.
For locking a Speaker connection turn the plug to the right. For unlocking pull the unlock button and turn
the plug to the left and pull it out of the socket.
2
Connect your PA amplifier optionally via a Speaker plug to the [
INPUT
] socket.
3
User the jack [
OUTPUT
] as output for the feedthrough signal, e.g. for connecting the input of another
speaker system.
Pin occupation of the Speaker jacks:
Information on installing audio cables
• Always treat cables carefully and protect them from damages during transportation.
• Install cables always in a structured way and protect them from damage.
• Cables must be installed in a way that no person can stumble over them. Always fix cables with an
appropriate tape.
• Cables should be installed directly (no loops, S-shaped overlengths).
• Always install cables far away from power cables (never closely parallel).
• Never put heavy objects like speaker systems, flightcases etc. on cables.
• Never operate cables wound up.
5. INSTALLATION
This speaker system must only be installed at a solid, plane, anti-slip, vibration-free, oscilation-free and fire-
resistant location.
Before installing the system, make sure that the installation area can hold a minimum point load of 5 times
the system's load (e.g. weight 20 kg - point load 100 kg).
The speaker system must never be installed higher than 100 cm without secondary attachment.
Every speaker system features two transportation handles. The speaker system should be carried without
force by two persons of the same size. Carrying the speaker system as one person alone should be avoided
as the high weight and the strain could lead to back damages and torsions. Please note that all speaker
systems with more than 25 kg weight must be transported with two persons.
Overhead installation
If this speaker system will be installed in a mounting height higher than 1 meter (e.g. on the stage, on a
stage element or on a framework) we speak of overhead installation. For overhead installation, the speaker
system must always be secured with an appropriate secondary attachment.
Safety bonds are allowed as secondary attachment for all speaker system up to a maximum weight of 60 kg.
Heavier speaker systems must be secured via appropriate measures based on individual calculations.
