Type:
Condenser (back electret)
Operating principle:
Pressure gradient
Polar pattern:
Line + gradient
Frequency range:
50 - 18,000 Hz
Sensitivity at 1 kHz:
10 mV/Pa; -36 dBu (± 3 dB/Pa)
Nominal impedance:
250 Ohm ± 30%
Load impedance:
1
250 Ohm ± 30%
Max. SPL:
135 dB (THD < 0.5% @ 1 kHz)
S/N ratio:
72 dB
Equivalent SPL:
21 dBA
Dynamic:
113 dB
Power supply:
16 V - 52 V DC phantom power
Current consumption:
3.5 mA
Connection:
3-pin XLR
Dimensions (LxWxH):
19 x 19 x 238 mm
Weight:
250 g
www.omnitronic.com
13030834_V_1_0.DOC
SHOTGUN MICROPHONE
Copyright
Nachdruck verboten!
Reproduction prohibited!
www.omnitronic.com
13030834_V_1_0.DOC
SHOTGUN MICROPHONE
© Copyright
Nachdruck verboten!
Reproduction prohibited!
MSM-100
S
PR
O
MSM-110
S
P
R
O
MSM-111
S
P
R
O
II
Condenser microphone with ball joint
Safety Instructions
Maintenance
Setting into Operation
Technical Specifications
The MSM PRO series was designed for live sound reinforcemant and
broadcasting and in studio or live recording. The microphone operates on
16-52 V phantom power. A foam windscreen is included in the delivery.
Maintenance and service operations are only to be carried out by authorized
dealers. Damage, caused by manual modifications on the microphone are
not subject to warranty. If the microphone is used for other purposes than
originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
We recommend a frequent cleaning of the device. Please use a soft lint-free
and moistened cloth. Never use alcohol or solvents!
Place the supplied windscreen on the microphone.
Insert the microphone into the XLR microphone input of the audio unit (e. g.
mixer or amplifier). The microphone input must provide phantom power
(16-52 V). Adjust the microphone to the sound sour
c
e, speaker or inst
ru
ment.
1: Ground
2: In Phase (+)
3: Out of Phase (-)
Please note: Every information is subject to change without prior notice. 28.11.2006 ©
MSM-100
S
PR
O
MSM-110
S
P
R
O
MSM-111
S
P
R
O
II
Condenser microphone with ball joint
Safety Instructions
Maintenance
Setting into Operation
Technical Specifications
The MSM PRO series was designed for live sound reinforcemant and
broadcasting and in studio or live recording. The microphone operates on
16-52 V phantom power. A foam windscreen is included in the delivery.
Maintenance and service operations are only to be carried out by authorized
dealers. Damage, caused by manual modifications on the microphone are
not subject to warranty. If the microphone is used for other purposes than
originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
We recommend a frequent cleaning of the device. Please use a soft lint-free
and moistened cloth. Never use alcohol or solvents!
Place the supplied windscreen on the microphone.
Insert the microphone into the XLR microphone input of the audio unit (e. g.
mixer or amplifier). The microphone input must provide phantom power
(16-52 V). Adjust the microphone to the sound sour
c
e, speaker or instr
u
ment.
1: Ground
2: In Phase (+)
3: Out of Phase (-)
Type:
Condenser (back electret)
Operating principle:
Pressure gradient
Polar pattern:
Line + gradient
Frequency range:
50 - 18,000 Hz
Sensitivity at 1 kHz:
10 mV/Pa; -36 dBu (± 3 dB/Pa)
Nominal impedance:
250 Ohm ± 30%
Load impedance:
1
250 Ohm ± 30%
Max. SPL:
135 dB (THD < 0.5% @ 1 kHz)
S/N ratio:
72 dB
Equivalent SPL:
21 dBA
Dynamic:
113 dB
Power supply:
16 V - 52 V DC phantom power
Current consumption:
3.5 mA
Connection:
3-pin XLR
Dimensions (LxWxH):
19 x 19 x 238 mm
Weight:
250 g
Please note: Every information is subject to change without prior notice. 28.11.2006 ©
1
2
3
1
2
3
©
