Dynamic USB microphone
Safety Instructions
Installation
The
was designed for digital recordings at the computer. The
does not require
additional drivers and is compatible with PC and Mac. The microphone gets its power from the computer
through the USB cable.
Plugs in directly to any computer with a USB port for digital recordings
Compatible with PC and Mac
No driver installation required, the
is identified automatically
Cardioid pickup pattern for effective feedback elimination
Encapsulation against the build-up of static charge
Well-balanced frequency range for natural sound
On/off sliding switch
Power supply via USB
Ideal for podcasters, musicians, journalists and anyone requiring recordings for websites or
multimedia presentations
Excellent quality at a low price
Cable with USB connector and stand included
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is
used for other purposes than originally intended or if it is not correctly connected, the product may
suffer damages and the guarantee becomes void.
Protect the device against humidity and heat. The ambient temperature must always be between
-5° C and +45° C. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Use the USB cable to connect the
to a computer with available USB port and set the
sliding switch to “ON“ to switch on the microphone. As soon as the
is connected to a
computer, it is recognized as generic USB device and is automatically installed. No additional drivers
are required.
You can confirm correct installation by opening the ”Sounds and Audio Devices" section of the
Windows Control Panel. In the “Audio” tab, the
should be selected as default device
(SSS USB Headphone Set is indicated) under “Sound playback” and “Sound recording”. In the
“Voice” tab, the
should be selected as default device (”SSS USB Headphone Set” is
indicated) under “Voice playback” and “Voice recording”.
You can confirm correct installation by opening the “Audio” section of your computer’s System
Preferences. The
should be selected (”SSS USB Headphone Set” is indicated) in the
“Input” and “Output” tabs.
Set up the microphone stand and insert the
from above.
M-20 USB
M-20 USB
M-20 USB
M-20 USB
M-20 USB
M-20 USB
M-20 USB
M-20 USB
M-20 USB
Windows 98 SE/ ME/ 2000/ XP/ Vista
Mac OS 9, OS X
Cleaning and Maintenance
Technical Specifications
For cleaning the microphone only use a soft lint-free and moistened cloth. Make sure not to allow any
water to enter the device and never use any solvent cleansers.
Type:...................................Dynamic (moving coil)
Directivity pattern: ...............Cardiodid
Frequency range:................50-14,000 Hz
Impedance:.........................600
Sensitivity: ..........................-53 dB (±3 dB)
Connector: ..........................USB (type A)
Power supply: .....................USB port
Dimensions:........................182 x 49 mm
Weight: ...............................200 g
Required operating system:
W
Windows 98 SE/ ME/ 2000/ XP/ Vista
MAC OS 9 / OS X
Please note: Every information is subject to change without prior notice. 20.06.2008 ©
www.omnitronic.com
13000418_V_1_0.DOC
© Copyright
Nachdruck verboten!
Reproduction prohibited!
USB MICROPHONE
USER'S MANUAL
M-20
USB
Dynamic
micr
ophone
M-20 USB
polar patter (cardiodid) at 1 kHz
frequency response (cardiodid)
USB port computer
USB connector M-20 USB
Delivery Includes
Dynamic microphone
USB cable
Microphone stand
M-20 USB
-
80
50
100
500
1k
2 k
5 k
10 k
20
20 k [Hz]
[dB ]
-
60
-
40
-
90
200
-
50
-
70
ENGLISH
