00072523.DOC, Version 1.0
14/18
12
Power input
Plug in the supplied power unit here.
13
Output FX
SEND
Output (unbal. 6.3 mm jack) for connecting units
with line level inputs (e.g. effctors).
14
Output PHONES
6.3 mm jack for connecting stereo headphones
(min. impedance 8 ).
15
Output MAIN OUT
Main output (unbal. 6.3 mm jacks, L/R) for the
master signal for connecting an amplifier or a
further mixer.
16
Output CTRL ROOM OUT
Output (unbal. 6.3 mm jacks, L/R) for connecting an
amplifier of a monitor system.
17
Output TAPE OUT
Stereo RCA connector of the master signal (post-
fader) for connecting the input of a recorder.
18
Input TAPE IN
Stereo RCA connector for connecting the output of
a recorder or another playback unit (e.g. CD
player).
19
Selector switch PHANTOM
When engaged, a 48 V phantom power is switched
on for all microphone inputs MIC.
Caution!
If the phantom power is switched on, no
unbalanced microphones must be connected.
Otherwise, these microphones may be damaged.
20
Control FX SEND
Level control for the signal of the effect send way at
the output FX SEND.
21
Selector switch
TAPE TO CTRL ROOM
When engaged, the signal of the input TAPE IN is
sent to the monitoring outputs PHONES and CTRL
ROOM out and indicated via the LED level display.
22
Selector switch TAPE TO MIX
When engaged, the signal of the input TAPE IN is
sent to the master signal.
