www.omnitronic.com
00051034.DOC, Version 1.0
Gooseneck Condenser Microphone
Safety Instructions
Setting into Operation
Cleaning
Technical Specifications
The OMNITRONIC
is a gooseneck condenser microphone with cardioid characteristic
and is ideally suited for lectures in conference facilities and DJ applications. The gooseneck
microphone is equipped with a switchable high pass filter to minimize low-frequency noise. It can be
directly inserted into a microphone connection or used as a desktop microphone together with a
microphone base. For operation, the microphone requires a phantom power.
1. Insert the microphone into a XLR microphone input or a microphone base. The microphone input
must provide a phantom power. If not, connect the microphone via an external phantom power
supply unit (e.g. OMNITRONIC LH-050) to the audio unit.
2. The microphone is equipped with a switchable high pass filter for attenuating low frequencies.
at the base
.
3. Adjust the gooseneck so that the microphone points directly at the sound source (speaker).
4. Always use the supplied windscreen to protect the microphone capsule from dust and moisture,
and reduce pop and wind noise to a minimum.
Type: ...........................Back electret
Polar pattern: ...............Cardioid
Frequency range: ........50 Hz - 16 kHz
Impedance: ..................200
Sensitivity:.................... -40 dB ± 3 dB
Max. SPL: ....................130 dB
Equivalent SPL: ..........24 dBA
High pass filter: ............6 dB at 80 Hz
Connection: ................3-pin XLR, balanced
Power supply: ..............Phantom power
.....................................9 - 52 V
Dimensions (L):............500 mm
GM-200
W
!
!
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.
Set
the recessed switch
to position
to activate the filter
For cleaning the microphone only use a dry cloth. Never use chemicals or water.
Please note: Every information is subject to change without prior notice. 10.07.2009 ©
GOOSENECK MICROPHONE
USER MANUAL
GM-200
