00057080.DOC, Version 1.0
12/12
5. ELECTRICAL CONNECTION
The complete connection is shown in figure C on page 3.
1. If the amplifiers to be connected are switched on, switch them off first.
2. Always connect the positive poles of the amplifier outputs and speakers to the corresponding clamping
contact
»
+
«
and the negative poles to
»
-
«
. To facilitate handling, the connection terminals can be
removed from their plug-in connections and replaced after connection.
3. Connect the speaker outputs of the amplifier to the terminals AMPLIFIER A. If a second amplifier is
used, connect it to the terminals AMPLIFIER B.
4. Connect the speakers to the terminals TO SPEAKER 1 to TO SPEAKER 4. It is possible to use speakers
of different impedances (4 to 16 ).
6. OPERATION
1. When setting the unit into operation for the first time, turn all volume controls to the left stop to zero first
before switching on the connected amplifiers.
2. Depress the button AMP. Thus, all speakers are switched on.
3. Select separately for each speaker pair with the buttons A/B which amplifier signal is to be reproduced.
4. Adjust the desired volume with the volume controls OUT 1 to 4 in each case.
5. For switching off all speakers, disengage the button AMP.
7. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
8. TECHNICAL SPECIFICATIONS
Frequency range:
20-20,000 Hz
Input power rating:
max. 100 W RMS per channel
Output power:
max. 18 W RMS per channel
Speaker impedance: 4-16
Dimensions:
430 x 200 x 73 mm
Weight:
3.4 g
Please note: Every information is subject to change without prior notice. 12.01.2011 ©
