10356120_V_1_0.DOC
17/22
Frontpanel
R
L
CLIP
CLIP
24 BIT DUAL DSP PROCESSOR
DEQ-231 DIGITAL EQ 2x 31 BAND
DEQ-231
EDIT
PROGRAM
CH SELECT
EDIT
A
MIDI
B
C
FREQ/ GAIN
LOCK / ESC
BYPASS
DIGITAL SERIES
31 BAND DUAL EQ
5
4
3
2
1
8
6
7
1) LCD DISPLAY
To display functions and operating status.
2) JOG-WHEEL
For adjusting the parameters. Turning this wheel to the right increases the parameter value and turning it to
the left decreases them.
3) PROGRAM BUTTON (Display A)
To memorize up to 100 programs.
4) CHANNEL SELECT BUTTON (Display B)
To select between the channels L, R, L & R
5) EDIT BUTTON (Display C)
To copy channels Left and Right and for FLAT-mode.
6) FREQUENCY/GAIN/MIDI BUTTON
To set frequencies and gain level.
7) LOCK/ESCAPE BUTTON
Press this button to cancel the previous editing status. Hold this button for about 3 seconds to activate the
LOCK funktion (display shows „LOCK“). All functions are locked now. To undo this function, hold this button
again for about 3 seconds until „LOCK“ disappears.
8) BYPASS BUTTON
This switch allows instant comparison of the original sound (display shows „BYP“) with the equalized sound
(display shows „GEQ“).
Rearpanel
MIDI THRU
MIDI OUT
MIDI IN
BALANCED INPUTS
www.omnitronic.com
115 V
1=GND
2=SIGNAL
3=SIGNAL
230 V
OUTPUT 2
OUTPUT 1
INPUT 2
INPUT 1
INPUT LEVEL
INPUT LEVEL
Typ/Type:
Spannungsversorgung:
Power supply:
Gesamtanschlusswert (max.):
Power consumption (max.):
Sicherung/Fuse:
T 0,125 A
OMNITRONIC DEQ-231
115V / 230 V AC, 50/60Hz ~
10 W
OMNITRONIC SHOWEQUIPMENT GmbH, GERMANY
GND
SIGNAL
-20 dB
-20 dB
+4 dB
+4 dB
15
10
11
12
14
16
13
15
14
16
9
(9) AC CONNECTION
Plug the power supply cable in here.
POWER SWITCH
Turns power to the equalizer on and off. Be sure to power-up before your power amplifier
is turned on to avoid loud transients which could damage your speakers or annoy your audience.
(10) AC VOLTAGE-SELECTOR
Make sure that the selector is properly set.
(11) MIDI OUT-SOCKET
(12) MIDI THRU- SOCKET
