00042383.DOC, Version 1.0
21/22
7 Press the button START/STOP. The turntable platter starts to rotate. While playing, the record can be
stopped at any place and be restarted with the button START/STOP.
8 To stop the playing, lift the tone arm with the tone arm lift and put it back onto the tone arm support by
hand. Stop the turntable platter with the button START/STOP.
9 After use of the turntable, secure the tone arm with the locking lever and switch off the unit with the
power switch. Fold down the protective cover as a protection against dust.
7.2 Adjusting the speed
The speed of the turntable and thus the pitch of a title can be increased or reduced by up to 10 % with the
control PITCH. In mid-position (control locks into place), the speed is precisely adjusted and can be checked
on the stroboscope ring of the turntable platter. While the turntable is revolving, observe the part of the
stroboscope ring which is illuminated by the stroboscope lamp. If the speed is precisely adjusted, the
markings on the stroboscope ring seem to stand still:
• at 45 RPM on the upper ring with a power supply of 230 V, 50 Hz
• at 45 RPM on the second ring with a power supply of 115 V, 60 Hz
• at 33 RPM on the third ring with a power supply of 230 V, 50 Hz
• at 33 RPM on the lower ring with a power supply of 115 V, 60 Hz
8. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the turntable. Please use a soft lint-free and moistened cloth. Never
use alcohol or solvents! For dusting the stylus and the records, use a carbon fiber brush for records (e.g.
item 10608985 carbon fibber brush).
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers. Should you need any spare parts, please use genuine parts. Should you have
further questions, please contact your dealer.
8.1 Transport
For dispatching the turntable pay attention that the tone arm weight and all other components of the unit are
only packed in their original packing material and/or are especially secured for transportation.
1 Place the protective cap on the stylus.
2 Secure the tone arm with the locking lever.
3 Unscrew the counterweight for the tone arm by turning it clockwise, pack it separately, and secure it
against displacement.
4 Please use the original packing box.
CH
9. ACCESSORIES
9.1 Replacement phono cartridge system and stylus
If required, the phono cartridge system or the stylus can easily be replaced. The corresponding replacement
parts are available from the retailer, e. g. the magnetic phono cartridge system S-15 and the matching stylus
S-15 from OMNITRONIC.
1 To
change the stylus
,
pull off the stylus support in forward direction. Put the new stylus on the stylus
system.
2 To
change the phono cartridge system
,
screw off the headshell from the tone arm.
Summary of Contents for 10603048
Page 2: ......