background image

OmniConverter

®

FPoE/S and FPoE+/S

User Manual

38 Tesla,  Irvine, CA 92618 USA

Phone: (949) 250-6510; Fax: (949) 250-6514

General and Copyright Notice

This publication is protected by U.S. and international copyright laws. All rights 

reserved. The whole or any part of this publication may not be reproduced, stored 

in a retrieval system, translated, transcribed, or transmitted, in any form, or by 

any means, manual, electric, electronic, electromagnetic, mechanical, chemical, 

optical or otherwise, without prior explicit written permission of Omnitron Systems 

Technology, Inc.
The following trademarks are owned by Omnitron Systems Technology, Inc.: 

FlexPoint

TM

, FlexSwitch

TM

, iConverter

®

, miConverter

TM

, NetOutlook

®

, OmniLight

®

OmniConverter

®

, RuggedNet

®

, Omnitron Systems Technology, Inc.

TM

, OST

TM

 and 

the Omnitron logo. 
All other company or product names may be trademarks of their respective owners.
The information contained in this publication is subject to change without notice. 

Omnitron Systems Technology, Inc. is not responsible for any inadvertent errors.

Warranty

This product is warranted to the original purchaser (Buyer) against defects in 

material and workmanship for a period of two (2) years from the date of shipment. 

A lifetime warranty may be obtained by the original purchaser by registering this 

product at www.omnitron-systems.com/support within ninety (90) days from the 

date of shipment. During the warranty period, Omnitron will, at its option, repair or 

replace a product which is proven to be defective with the same product or with a 

product with at least the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility, 

at Buyer’s expense. Omnitron will pay the shipping charge to return the product to 

Buyer’s designated US address using Omnitron’s standard shipping method.

Limitation of Warranty

The foregoing warranty shall not apply to product malfunctions resulting from 

improper or inadequate use and/or maintenance of the equipment by Buyer, Buyer-

supplied  equipment,  Buyer-supplied  interfacing,  unauthorized  modifications  or 

tampering with equipment (including removal of equipment cover by personnel not 

specifically authorized and certified by Omnitron), or misuse, or operating outside 

the environmental specification of the product (including but not limited to voltage, 

ambient temperature, radiation, unusual dust, etc.), or improper site preparation 

or maintenance.

No other warranty is expressed or implied. Omnitron specifically disclaims the implied 

warranties of merchantability and fitness for any particular purpose.

The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron 

shall not be liable for any direct, indirect, special, incidental, or consequential 

damages, whether based on contract, tort, or any legal theory.

Page 2

Summary of Contents for OmniConverter FPoE+/S











Reviews: