The OmniAire 18000
is our largest portable HEPA air system with a 18,000 CFM air flow capacity. The
OA18000 is a modular air filtration machine with a unique versatility in setup and number of optional filters to assist
you on your projects. The OmniAire 18000 can be used to purify and re-circulate air or create positive or negative air
pressure containment areas. It is used for mold, asbestos & lead abatement projects, construction sites, restoration
projects, water or fire damage clean-up and many other applications.
Blower Cabinet Features
The OmniAire 18000 modular system consists of Blower cabinet and three Filter cabinets, all connected by flex hoses.
The cabinets are easy to transport and setup at any type of projects, including high-rise buildings and HAZMAT
removal jobs. The Blower cabinet contains twin 22 vane-axial blowers with 7.5 HP motors and controls and operates
on a 3-phase 480 VAC/60HZ/30 AMP power source. The portable blower cabinet is mounted on (4) 4” heavy duty
casters with brakes. The reinforced steel internal frame enables the blower unit to be moved by forklift or crane.
HEPA Cabinet Features
Each Filter cabinet contains 3 filters, which could be 99.99% HEPA or bag filters. The individual filter cabinets each have
a differential pressure gauge to measure loading of the filters with particulates. Filter cabinets are mounted on casters
with brakes, weigh 200 lbs. when fully loaded with HEPA filters. Options such as HEPA, Carbon, and Bag filters allow
flexibility from project to project. Three (3) flex hoses connect the modular filter cabinets to the blower cabinet. Hoses
are 18” dia, 25’ long.
OmniAire 18000 Specifications
For Blower Unit: Quantity (1)
Airflow - 18000 cfm*
Power Requirement - 480V/60 Hz/3 phase/30 amp.
Controls - Dual motor starter boxes with 16A disconnects w/lockout feature, overload protection, contactor and ON/
OFF switch. Power ON Indicator and hour meter.
Blowers - (2) 22” Vaneaxial fans with 7.5 hp motors.
Blower Cabinets - Aircraft grade aluminum, closed end rivet construction. All seams are silicone sealed before riveting.
(4) - 4” locking casters for ease of movement, 900Lbs., 30” wide, 48” long, 72” high
Exhaust – (2) 24” diameter rings. Inlet (3) – 18” dia
contaminated
containment area
positive pressure
clean contained area
clean
filtered
air
sealed contaminated
containment area
sealed
clean room
clean
filtered
air
recirculation
sealed contaminated
clean
filtered
air
contaminated
air
negative pressure
sealed contaminated
sealed
clean room
clean
filtered
air
negative pressure
contaminated room
clean
filtered
air
contaminated
air
contaminated
air
contaminated
air
contaminated
containment area
positive pressure
clean contained area
clean
filtered
air
sealed contaminated
containment area
sealed
clean room
clean
filtered
air
recirculation
sealed contaminated
clean
filtered
air
contaminated
air
negative pressure
sealed contaminated
sealed
clean room
clean
filtered
air
negative pressure
contaminated room
clean
filtered
air
contaminated
air
contaminated
air
contaminated
air
To create
NEGATIVE PRESSURE
inside the containment,
more air has to be exhausted out than leaks into the
containment. Place the machine inside the containment
and hook a flexible duct to the outlet ring of the
machine exhausting to outside the containment.
(See Above) All of the air being exhausted has been
treated by the HEPA filter so no contaminants are being
exhausted from the containment.
To create
POSITIVE PRESSURE
inside the containment,
more air has to be pumped in than leaks out of the
containment. Place the machine outside the containment
and hook a flexible duct to the outlet ring of the machine
ducting the exhaust into the containment. (See Above)
Application Examples
