background image

1. Power cable - Connect the power cable provided to the [Power] port in the Junction 

Box and to a DC power source on your vessel. It is recommended that you use 
either a 12V or 24V DC power. The power cable consists of Black for (-) negative, 
White for (+) wire. Please ensure that the correct polarity is inserted into the right 
terminal (Fig. 6).

2. Camera harness - Connect the end of the camera harness to the ethernet port in 

the Junction Box marked [Camera].

3. Controller cable - Connect the ethernet cable to the Junction Box [Controller/MFD] 

port and the other end the Joystick Controller.

4. Console cable - Connect the ethernet cable to the Junction Box [Controller/MFD] 

port on the right and the other end to the Console [Camera] port.

5. NMEA 0183 socket - For devices that require input from NMEA 0183 devices, 

connect the NMEA 0183 data source to the [NMEA] socket in the Junction Box 
using 24-20 AWG cables and the output from the NMEA device to the Rx pins in 
the Junction Box.

Connecting the Cables

Junction Box

The Junction Box is the primary means to provide power to the Camera and Joystick 
Controller. It also serves as a hub for data transmission and interfacing point to other 
connected network devices.

Fig. 6

Fig. 5

1.  Power 
2. Camera 
3. Joystick Controller
4. Console
5. NMEA 

1

2

3

4

5

Fig.7

6. Console cable - 

Connect the ethernet cable to the Console [Camera] port and to 

the Junction Box [Controller/MFD] port on the right (see no.4).

7. HDMI cable - Connect the HDMI cable to the HDMI input port on the Console and to a 

supported MFD / Touchscreen monitor.

8. USB cable - Connect the USB cable to the USB input port on the Console and to a 

supported MFD / Touchscreen monitor.

9. Power cable - Connect the power cable provided to the [Power] port on the Console 

and to a 12V DC power source on your vessel.

Console

The console provides high resolution HDMI video interface and multi-touch control 
capabilities with compatible displays.

You can choose to display the video output of your Ulysses Mini to a supported MFD 
via IP (ethernet) or via HDMI to a Touchscreen monitor/MFD. We recommend using 
HDMI option (above) when using higher resolution cameras for better video 
performance. However, if you choose to connect it through ethernet, instructions are 
as follows:

1. Connecting to a MFD:
Connect the Ethernet cable from the [Controller/MFD] port in the Junction Box to  a 
compatible MFD. The camera will work with Garmin MFD with OneHelm. If you are 
using a Garmin’s MFD, you should see a Ulysses Mini icon displayed on the 
‘OneHelm’ page after powering up both the MFD and camera system. Launch the 
Ulysses Mini icon to use the camera.

If you are using a Furuno or Navico’s MFD, you will need to configure the camera 
system to communicate in the correct network environment by using a web browser 
or an analog monitor/Joystick Controller. Refer to setup section on the next page.

2. Connecting to a PC:
Connect an Ethernet cable from your PC to Ethernet port on the Junction Box 
marked [Controller/MFD]. On your web browser, enter the default IP address as 
indicated at the base of the turret and login with the following:

 

Username: admin    

 

Password: 12345

Full control of the camera can now be accessed through the Web browser.

Connecting to your Display via Ethernet (Options)

6. Camera
7.   HDMI
8. USB
9. Power

6

7

9

8

Reviews: