UM-003-A OPS243-A User Manual
3
OmniPreSense Corporation
Figure 3. PuTTY Startup Menu
Once connected, the data reported by the sensor will start streaming to the terminal when an object
either in motion appears (-A, -C Doppler radar sensors) or there are objects in the sensors field of view (-
B, -C FMCW radar) to report the range to. The default settings are shown in Table 2. If there is no object
moving in front of the
sensor or it’s not pointing at any object
, no data is reported or streamed to the
terminal. A simple wave of the hand will show data like that shown in Figure 4. Any of the API commands
can now be executed to change the output data or query the configuration.
Figure 4. Streaming Data with Tera Term