10
Version 1.0
2.
If motion is detected, the indicator light will
flash, then turn off.
3.
The device is now in PIR sensor mode.
4.
If you wish to turn it off PIR sensor mode, press
the “PIR Sensor” button once more. The
indicator light will flash, and the camera is now
in standby mode.
CHANGING YOUR DEVICE SETTINGS (INCLUDING THE
DATE/TIME STAMP)
Your OmniOutlet comes with an A/V cable that is used
to connect the device to a monitor/TV so that you can
adjust various settings. See page 3 to locate the AV
port on your device.
1.
Connect your device to a monitor/TV using the
provided A/V Cable.
2.
Power on the device.
3.
Press the motion detection button to stop
recording.
4.
Press the “MENU” button on the remote.
