Sealing
For Omnicomm LLS sensors, the bolt or the self-tapping screw and the connection may be
sealed as shown below:
1. Install the bolt or the self-tapping screw through a hole in the seal
2. Close the seal cover with a snap
3. Enter the seal and cover numbers in the report
Put the rotary seal on Omnicomm LLS 30160 connector:
1. Put the sealing wire through the holes in the connectors and in the rotary seal
2. Twist the seal tab to tighten the wire
3. Tear the seal tab off
Sealing
Omnicomm LLS 30160, LLS-AF 4 Fuel Level Sensors
23
