displayed value.
The additional parameter can be displayed by default upon switching the
Omnicomm LLD indicator on. For this purpose, in Omnicomm Configurator, in the
«Settings» section, in «The display mode at startup» field, select the «Additional
parameter» option.
To display the vehicle speed, the values read from the universal input and the volume
of fuel dispensed, it is necessary to edit the appropriate settings of the Omnicomm
Terminal.
Technical Specification
Specification
Value
Supply voltage, V
from + 8 to + 45
Network interface
RS-485
Data exchange rate via EIA-485 interface by default, bit/sec
19 200
Calibration table, rows
56
Number of the connectable Omnicomm LLS sensors
2
Ambient operating temperature, ˚С
from - 40 to + 70
Overall dimensions, mm
137х61х23
11
Technical Specification
