7
User Manual
1 to 4:
Indicate buttons that serve to select the RCP about what we’re going to act. With a touch are selected
RCPs 1 to 4. To select 5 to 8 RCPs has to do a double tap. Only the first four feature a physical link to
Tally and GPI output to activate the array (see diagram in the following point DB15 connector).
5 to 7:
Are rotating commands that allow you to act on the values of R, G, B, gamma and Skin when menu
selection.
8:
Indicates a slider control with three features:
- Moving from top to bottom it acts on the iris.
- Turning to the bottom of the command modifies the black level
- Pressing the command activates the corresponding GPI output.
9:
Indicates a rotary Commander with coach that allows us, as the screen:
- Turning the command, slide the cursor through the menu options.
- Turning the command, increase or decrease the numeric value of the selected value.
This rotation is sensitive to speed, so that the higher speed, greater increment or decrement.
- Pulsing accepts the selection or validates the value.
10:
Indicates a mini joystick configurable depending on the type of webcam. So, for example, can move the
pan and tilt, move the zoom or move the RCP OSD options.
2. Operation
2.1. Content submission
• Universal Remote Control Panel RCP 002
• AC/DC; Input 100-240VAC 50/60 Hz; 12 VDC output 2000mA
• Mini 4Pin XLR
2.2. Preparation of the installation
• The installation of this appliance must be performed by qualified staff.
• Do not modify this equipment.
• Do not subject the unit to strong shocks or vibrations.
• To avoid risk of overheating, el ventilate properly the product.
• Do not expose the unit to extreme temperatures.
• To prevent fire or electrical shock, do not expose the unit to rain or moisture.