![Omni OMB2010 User Manual Download Page 11](http://html1.mh-extra.com/html/omni/omb2010/omb2010_user-manual_3994931011.webp)
STEP 4 - Assembling the handlebar
1. Hold the handlebar (B) against the cut-out on the han-
dlebar column (C). Secure the handlebar (B) with the
handlebar clamp (K-1), a spring washer (K-3), a washer
(K-4), and an Allen screw (K-5).
2. Route the hand pulse cable (B-4) through the drill hole
on the front of the handlebar column (C) and back out
at the top.
3. Secure the front cover (K-2) with a spring washer (K-3),
a washer (K-4), a spacer sleeve (K-6) and the T-grip
hand screw (K-7).
4. Secure the rear plastic cover (K-8) to the handlebar col-
umn (C) with 4 self-locking screws (K-10) and a Phillips
screw (C-2).
STEP 5 - Assembling the saddle post and saddle
1. Secure the saddle (J-11) on the saddle post mount (J).
Pull out the height adjustment screw (J-2) and push the
saddle post (J) onto the main frame (D).
2. Release the height adjustment screw. Make sure that
the saddle post clicks correctly into place.
STEP 6 - Assembling the computer
1. Connect the hand pulse cable on the handlebar column
with the computer cable on the rear of the computer.
2. Then insert the computer cable on the handlebar col-
umn into the rear of the computer.
3. Secure the computer on the mount on the handlebar
column using 4 Allen screws (A-1). Avoid crushing the
cable to prevent malfunctions.
GETTING STARTED
The device has a generator system. The rechargeable bat-
teries may be totally discharged after an extended period
of disuse. A mains plug is provided for this case.
We recommend charging the batteries for approx. 8 hours
using mains power before use.
Note: Always plug the power plug into the device first, and
then into the mains.
1*
1*
1*
1*
2*
2*
4*
STEP 4
DANGER - Danger of injury
The saddle post must be inserted into the
saddle post mount up to the minimum
insertion depth. Note the max. mark on the
saddle post.
OMB2010 Tagma_Instructions manual 2011_GB.indd 11
23.01.2012 17:21:16