omnicleanair.com 425-512-0379 [email protected]
4640 Campus Place, Ste 100, Mukilteo, WA 98275
In addition to the CFM/CMM reading, this menu also shows you the current number of Air
Changes per Hour (ACH), based on your fan settings and the room size you have entered. For
instance, if you had a 2500 cubic foot room and your fan was set at 500cfm, your ACH would be
12 (60 minutes divided by 2500/500). The example above shows an ACH of ???; this would be
the reading if you skipped the Guided Setup or entered “I Don’t Know” in the Enter Room Size
menu.
6
Enter Room ID allows you to assign a 3 digit
alpha-numeric code to the space the unit is located in.
This is helpful if you plan to move it frequently. Use the
UP/DOWN arrows to change; OK to select.
The unit will then go into operational mode. The display
will show Cubic Feet per Minute (CFM) or Cubic Meters
per Minute (CMM). This can be adjusted using the
UP/DOWN arrows.
Press OK to return to the Main Menu. Select Activate
Safety Lock, then press OK again to lock the current
settings. This will prevent tampering. Press OK twice
again to unlock and adjust settings.
In addition to the above, from the Main Menu there is
also an option for Passcode Setup. This feature is
reserved for administrators or authorized users to
provide additional security. Contact your administrator
for more information.
Normal Operations
Now that Guided Setup has been completed, your unit will return to those settings each time it
is turned on. To change these settings, press OK and toggle to Enter Setup Mode. Make desired
changes and select Go Back to return to normal operating status. The machine must be
operated with a HEPA and pleated PreFilter in place.
