omnicleanair.com 425-512-0379 [email protected]
4640 Campus Place, Ste 100, Mukilteo, WA 98275
Display & Monitoring Panel
User Interface
with UVGI
(OCA510 &
OCA1210)
User Interface
without UVGI
(OCA500 and
OCA1200
)
First Time Setup
Turn Plug OCA unit into appropriate power source. The power button will flash white. Press
power button. The unit will perform an internal safety/maintenance check. If there are any
safety or maintenance issues, one or more of the HEPA, UVGI or PREFILTER indicators will turn
red and the housing light for that area will flash blue. If this occurs, consult the Troubleshooting
section of this manual.
You will then access the Enter Guided Setup screen.
Press OK to enter room size and room ID information, or
select Do this later to bypass setup. (Note: if the Guided
Setup is not completed, machine cannot display Air
Changes per Hour).
Enter Units prompts to select either US Standard (ft., in.)
or Metric (M,cm ). You can also enter “Go Back” to return
to the previous menu.
Enter Room Size lets you either enter the dimensions of
the room the unit will be in, the volume of the room (if
known), or select I Don’t Know. I Don’t Know sets the
unit at its highest output.
If DIMENSIONS or VOLUME is chosen, use the UP/DOWN
arrows to increase or decrease the highlighted
dimension or room size. Press OK to enter and when
complete.
5