Copyright
This manual is published by OMNI International 935 Cobb Place Blvd, Kennesaw, GA 30144 USA. Copyright
2021, OMNI International, Inc. All rights reserved, including but not limited to those rights to reproduce this
publication or parts thereof. Reproduction of this publication or parts thereof, or the products it describes,
by any means or in any form is expressly prohibited without the written permission of OMNI International.
Trademarks
OMNI International is a registered trademark of OMNI International. All other trademarks are the property of
their respective owners.
Proper Equipment Operation
To reduce the risk of electric shock, do not remove the cover. No user serviceable parts are inside. Refer to
qualified service personnel if help is required.
Use this product only in the manner described in this manual. If the equipment is used in a manner not
specified by the manufacturer, the protection provided by the equipment may be impaired.
Cleaning
Follow internal laboratory process for cleaning and decontamination using 70% ethanol followed by a
disinfecting wipe, then a final rinse with ethanol.
Preventative Maintenance
Normal use: 12 month interval.
Heavy use
may require a 6 month interval.
Electric Supply
4C to 40C/ 39F to 104F, Humidity: 5% to 95% RH. Internal use only
Electric Supply
19-042E 115V, 50-60Hz, 4A Max USA & Canada
19-042E 220V, 50-60Hz, 4A Max International
FCC
This device complies with part 15 of the FCC (United States Federal Communications Commission) Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause
undesired operation.
CE
This device complies with all CE rules and requirements.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
DO NOT: Attempt to service the Bead Ruptor Elite ™ Bead Mill in a manner other than those discussed
in this manual. Any service must be performed by a qualified service technician. This can be either an
OMNI Technician or an end user resource. All parts need to be sourced from OMNI International service
department.
For any issue that is unsuccessfully corrected using this guide, please contact your authorized dealer or call:
935 Cobb Place Blvd.
Kennesaw, GA 30144
800.776.4431 • 770.421.0058
www.omni-inc.com
Summary of Contents for Bead Ruptor 4
Page 1: ...User Manual Bead RuptorTM 4 Bead Mill Homogenizer...
Page 2: ......
Page 14: ...Notes...
Page 15: ...Notes...
