In order to configure the IP Address the user should first connect a PC/
Laptop to the gateway via a Ethernet patch cable and power on the
gateway.
The default IP address on the Multitech gateway is 192.168.2.1, to connect to
the gateway the user must first configure their computers Ip address to be
within the same subnet range for example 192.168.2.10.
Once this has been configured the user can login onto the gateway
via their browser by typing in the IP address of the gateway as follows,
https://192.168.2.1 (MultiTech IP67 setup POE setup: ‘’Out’’ on POE injector
connects to IP67, ‘’In’’ connects to PC/ Switch/Router Default IP: 192.168.2.1
Or configure PC to obtain IP4 address automatically as IP67 serves as DHCP
server by default Connect IP67 base station directly to PC and access
settings from PC’s web browser by 192.168.2.1 Initial setup Follow 1st time
auto setup from web portal Specify IP address according to local network
Specify Gateway as IP of local gateway Preferred DNS as IP of Local gateway
Secondary DNS as 8.8.8.8)
Please follow instructions as shown in below screen shots,
V21220SLP
32
4.2.1 Configuring IP Address
