Sense Asset User Guide
1.1.
Activating the Sense Asset
Before using the Sense Asset you must activate and configure it for your Quuppa Intelligent
Locating System.
1.
Press the button for 1 second to wake the Sense Asset (Quuppa) from storage state.
2.
Within 30 seconds, send a configuration command to the Sense Asset (Quuppa) from
the Quuppa Site Planner (QSP) and add the tag to the project. For details, see
instructions on Quuppa tag configuration from the Quuppa Customer Portal (QCP).
1.2.
Sense Asset 2D barcode
There is a 2D barcode located on the underside of the Sense Asset which contains the tags
ID number. The 2D barcode can be scanned with either a separate 2D barcode reader or a
suitable mobile phone app.
1.3.
Sense Asset NFC Configurable Settings
Sense Asset settings can be configured via NFC. Omni-ID provides software that works with
ST Microelectronics M24LR Discovery NFC PCB tool. For further information refer to Omni-
ID ‘Sense Config PC App User Guide’.
2.
Product IO Settings
The Sense Asset is equipped with a bi-colour LED and push button for alerts. The following
table details the IO configuration:
IO
Function
Output 1
Green LED
Output 2
Red LED
Input: Button 2
Button Push
The button press is reported back to Quuppa Positioning Engine (QPE) as ‘Button 2’.
