Page3
Step 4 - Tighten Front Face Screws
Tighten the screws until the faces in the
circle butt up against each other.
Tighten
Step 5 - Replace Screws Holding Front Face to Base
Pull back on the front face while replacing
the two screws. Stop turning the screws
as soon as they become tight so as not to
damage the thread.
Pull
Step 6 - Roost Racks And Droppings Tray
Insert the two roost racks and the
dropping tray. Make sure that the clip on
the underside of the tray ‘clicks’ into place
everytime you put the tray in.
Your chickens are now ready to move in!
If you have any problems converting your eglu call us on
0845 450 20 56 or email [email protected]
