Omicron DANEO 400, User Manual

Page: 11 / 80

DANEO 400 overview
11
3 DANEO 400 overview
3.1 Designated use
DANEO 400 is a hybrid measurement and recording device to be used in protection, automation, and
control systems for the electrical power industry.
The system is designed to record and analyze all conventional signals (such as secondary voltages
and current and hard wired binary signals) and messages on the communication network of the power
utility automation system.
Typical applications are in factory acceptance tests (FAT), site acceptance tests (SAT),
commissioning, and troubleshooting.
DANEO 400 is a portable device for temporary use. It is not designed to perform mission critical
operational tasks in 24/7 applications.
The device is intended for commercial use operated by trained personnel and is not suited for private
use.
3.2 Key features
Key features of DANEO 400 are:

Recording and analyzing any traffic on the substation communication network

Distributed recording with multiple units

Time synchronized measurements

Portable measurement system

Unattended operation mode

Remote control over TCP/IP network

Time synchronization using the IEEE 1588 precision time protocol

Aggregated and time-aligned presentation of results

Generated network traffic does not impair the substation automation system operation
DANEO 400 hardware main features are:

Analog inputs for voltages and currents

Hard-wired binary I/Os

Ethernet interfaces with Power over Ethernet (PoE)

USB interfaces (host and device port)

EtherCAT ports for extension devices

IEC 61850 GOOSE

IEC 61850 Sampled Values (9-2LE @ 80SPC)