Omicron Lab CT Analyzer, User Manual

Page: 57 / 254

55
Running a CT Test (Detailed)
Note: The test results and settings of each test finished with the "Test ok"
status are automatically stored to the file OMICRON\AutoSave\
CTAnalyzer.xml on the Compact Flash card. The existing CTAnalyzer.xml
file is overwritten with each successful test. Tests that could not be finished
successfully or that were aborted by the user are not stored and thus do not
overwrite the existing CTAnalyzer.xml file.
4.4 After the Test is Finished
After the test is finished, the CT-Object card displays the CT data determined
during the test (refer to Figure 4-8).
Figure 4-8 CT-Object card after the test is finished
Now, you can enter the "Location" and "Object" details and save the test (use
the cursor keys to scroll within the card and select edit fields).
Figure 4-9 CT-Object card after the test, ready to enter location details
(left) and after saving the test (right)
The assessment of the individual parameters can be viewed on the
Assessment card (Figure 4-10).
Figure 4-10 Assessment card after the test is finished