READ & SAVE ALL INSTRUCTIONS
THE RHINOBOND HAND WELDER
WARNING
The RhinoBond System produces
heat that can seriously injure
people and damage metal
objects.
Please be sure that you
and your crew members read and
understand all instructions in this
manual before attempting to use
the RhinoBond System. Failure to
follow all instructions could result
in
property damage, serious
personal injury, electric shock
or death.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety. Children should be
supervised to ensure that they do
not play with the appliance.
DO NOT USE THIS TOOL
if you
have (or anyone near you has) a
pacemaker, surgical implant,
prosthesis or other medical
device.
The RhinoBond tool may
interfere with proper medical
device operation.
DO NOT
activate tool over metal
objects in/on the floor.
DO NOT
use the cord to carry
the tool.
UNPLUG THE CORD
before
attempting to inspect or clean the
tool, or you risk electric shock.
Make sure power/extension cords
do not create a trip hazard.
DO NOT
activate tool over the
power cord.
KEEP CORD AWAY FROM
heat,
liquids, sharp edges and moving
parts.
STAY ALERT.
Do not use this tool
when tired or under the influence of
drugs, alcohol or medication that can
alter your awareness.
DO NOT
hold any objects containing
metal in the direct proximity of
the inductor during use, including
watches, jewelry, keys, mobile
phones, etc.
IF CORD IS DAMAGED,
immediately discontinue using the
tool and contact OMG Roofing
Products for re pair.
800-633-3800 (+1 413-789-0252)
Activation Button
Energy Setting
Dial
Power
Cord
Induction Coil
Handle
REGION
USA / CANADA
UK / IRELAND
NETHERLANDS
AND REST OF EUROPE
CHINA
POWER REQUIRMENTS
110-120V / 20A / 50-60Hz
110-220V / 16A / 50-60Hz
220-230V / 10A / 50-60Hz
220V / 50Hz
EXTENSION CORD
12 gauge (min.), 100-ft. (max.)
110V, 2.5mm X 30m
16A (230V 3x15), 30m
10A, 30m
PORTABLE GENERATOR
POWER SOURCE
5,000W min. with
20A GFCI Circuit
2.5 KVA min. with 16Amp
(110V) protected circuit
2.5 KVA min. with 10Amp
(230V) protected circuit
Honda EU20i 1.6 KVA with 8 Amp
(230V) protected circuit
RHINOBOND TOOLS PER
GENERATOR *
2
1
1
1
POWER REQUIREMENTS CHART
LED Control
Lights
Heat Sinks
(3 included)
(Magnet design may vary)
Extension Cord
(Sold Separately)
(
12 gage, 100-ft./30m max)
RhinoBond Hand Welder Owner’s Manual
Page 3
See page 7 for country specific plug adapters.
Centering Mark
Summary of Contents for RhinoBond RBHW1
Page 8: ......
