D.18 Roll
cod. 197L18RT
197L18RT_D18Roll 181209 IV
Via Foresto 42 - 31058 SUSEGANA TV ITALY Tel.0438455318 Fax 0438455530 E-mail: [email protected] http://www.omer.it
omer
s.p.a.
Manuale d’uso, manutezione e parti di ricambio Parte 2
Use, maintenance and spare parts manual Part 2
Dati tecnici
Technical data
Misure impiegabili mm
Usable lenghts mm
Capacità caricatore n° punti
Magazine capacity No. of fasteners
Pressione d’esercizio
Working pressure
Dimensioni (AxBxH) mm
Dimensions mm
Consumo aria litri/colpo
Air consumption litres/shot
Peso kg
Weight kg
ISO 5349-86
Valore medio ponderato di vibrazione
sull’impugnatura max.33 colpi
Weighted mean value of vibration
on the grip max.33 shots
ISO 3744
Potenza sonora emessa
Emitted sound power
ISO 11201
Pressione sonora in pos. operatore
Sound pressure at the workstation
2
<2,5 m/s
1000
5÷7 bar
70÷100 psi
1
,32
15÷18
93,7 dB(A)
84,3 dB(A)
237x115x222
2,35
Come risolvere i problemi -
Trouble shooting
Note -
Notes
Problema
Possibile Causa
O-ring sulla valvola (35P016) o il tubo
(35P017N) sono rovinati
.
Sostituire le parti rovinate
1-
2- O-ring 35P042N è rovinato.
O-ring sulla valvola (35P016) o il tubo
(35P017N) sono rovinati.
Sostituire le parti rovinate
Sostituire O-ring
O-ring del pistone rovinato.
1- Controllare e stringere la vite 35P054.
2- Controllare e cambiare i pezzi 35P009,
35P014.
1- Vite 35P054 allentata.
2- 35P009, 35P014 rotti per usura.
Perdita d’aria dal
battente
Perdita d’aria dal
coperchio
Perdita d’aria dal
cilindro
Mancato
funzionamento
Inceppamento
1- Usare graffe corrette.
2- Lubrificare in modo corretto.
3- Controllare la vite 35P054.
1- Dimensioni delle graffe sbagliate.
2- Lubrificazione insufficiente.
3- Vite allentata.
Soluzione
Tipo di punto
Type of fastener
®
®
ROLL D
0,95x1,90
Gauge: 16,5
18
3/4”
5/8”
15
Problem
Possible Cause
O-rings on valve (35P016) or tube (35P017N)
cut or broken.
Replace the O-rings
1- O-rings on valve (35P016) or tube
(35P017N) cut or brokem.
2- O-rings 35P042N cut or broken.
Replace the O-rings
Replace the O-ring
O-rings of piston rod cut or broken.
1- Check and tighten scre 35P054.
2- Check and replace the parts 35P009,
35P014.
1- Screw 35P054 loose.
2- 35P009, 35P014 worn aut.
Trigger leaks air
Exhaust cap leaks air
Cylinder leaks air
Failure cycling
Jamming
1 - Use staples in correct size.
2- Lubricate properly.
3- Check and tighten screw 35P054.
1- Wrong sizes of staples.
2- Insufficient lubrication.
3- Jaw screw loose.
Correction