TECHNICAL SPECIFICATIONS
Battery type
Lithium ions
Battery size
20 x 3 mm
Temperature of use
-20°C to 50°C
Battery type
CR2032 3 Volts
• Do not use sharp objects to clean the device.
• Avoid solvents and chemical cleaners that might damage plastic
components.
• Avoid heavy impact and extreme treatment as they could reduce
product life.
• Do not use the product near residual substances, stains or dust resulting
from mechanical processing of ferrous materials because the keys of SP2
are magnetic and said residue might impair good clock function.
REGISTER YOUR PRODUCT
By registering your SP2 you allow Omer to send you e-mail updates for the
firmware (software SP2) and for dive master (PC/SP2 interface software); to
register, visit the website www.omersub.com or www.sporasub.com
QUICK START UP MANUAL
IMPORTANT WARNINGS!
•
Refer to the important product/safety guide in the package for
warnings about the use of the product and other important
information.
•
Always seek medical advice before starting or changing an exercise
programme.
ACTIVATE YOUR SP2
Your SP2 is on energy saving mode to avoid
battery consumption.
You must, therefore, activate it by pressing
any key for more than 5 seconds.
Lap/Reset
[L/R]
Mode
[M]
Start/Stop
Sensors
[S/S]
Light
[EL]
ASSIGNING THE KEYS
Mode [M]
• To select between Clock, Dive, Chronograph, Timer, History and Setup
modes, press the key [M] until the desired icon/mode is displayed on the
screen.
• To exit the current status and return to the previous menu.
Start/Stop Button [S/S]
• To activate Chronograph 'start' or 'stop' in Chronograph mode.
• To activate Timer 'start' or 'stop' in Countdown mode.
• To increase the value displayed on the settings display or to move the
cursor to the next item.
Lap/Reset [L/R]
• To activate 'lap' or to perform 'reset' in Chronograph mode. To reset the
Timer during Countdown.
• To increase the value displayed on the settings display or to move the
cursor to the next item.
Light [EL]
• To activate backlighting EL for about 3 seconds. (To the exclusion of the
History & Setup Mode)
• In the History mode/Setup mode, keep [EL] pressed for one second to
activate backlighting.
• To select a setting on the settings display.
• To confirm the items selected on the settings display.
1. CLOCK mode
2. IMMERSION mode
5. HISTORY mode
It is activated/deactivated at a depth of 1 m.
It has 2 display modes by pressing Start/Stop when the clock is in DIVE).
3. CHRONOGRAPH mode
Allows training on land with heart rate monitoring.
4. COUNTDOWN mode
Immersion time.
Circuit number.
Instant
depth.
Water
temperature.
Heart Rate.
Maximum depth.
Circuit time.
Elapsed time.
Countdown
OrologReal time clock.
Immersion time.
CONNECTION TO THE PC
To connect SP2 to the PC (not the MAC), you must download the PC/SP2
interface software from the website www.omersub.com or www.spora-
sub.com, install it on your PC and connect SP2 with the dedicated clip,
which is provided. Carefully make the connection in CLOCK mode and
ensure that all contacts of the clip and two centring pins are correctly
positioned.
List of all immersions present individually in the clock.
Total daily immersions (Daily Total), from a synthesis of the day's
immersions.
History of total immersions (Odometer); provides a summary of all
immersions.
6. SETUP mode
All allowed clock parameters can be set and changed.
[EL]
[M]
HISTORY mode
Total number of
immersions
Total immersion
time
Maximum depth
Minimum
temperature
Average
heart rate
Maximum
heart rate
Calories
[S/S]
[S/S]
[S/S]
[L/R]
[L/R]
[L/R]
[L/R]
[L/R]
[L/R]
[L/R]
[S/S]
[S/S]
[S/S]
[S/S]
www.omersub.com
