Clinching depth adjustment
1 - Loosen the nut which stops the end-run screw.
To avoid flattening/damaging the material to be fastened it is possible to set the clinching depth by adjusting
the end-run screw.
2 - Screw or unscrew the end-run screw to adjust
the clinching depth.
3 - Tighten the locking nut.
1
2
3
- 12 -
max 10 mm
min 0,5 mm
Disconnect the air before proceeding with
the adjustment.
Summary of Contents for 1146050ROP
Page 15: ...Spare parts 16...
Page 20: ...Notes 22...
