2.2. Step 2 – Fixing the Disc (top). Please use
another 6x wood screws #10. Use the Allen
wrench to tighten the screws. Please notice that
the Disc (top) #1 has two sides. A side with
circles cut in the wood’s surface to hide the
screw heads. Tighten the screws from this side.
2.3. Step 3 – Setting the feet to the Disc
(bottom). Before proceeding with the assembly,
set the 3x feet and screws #8 to the Disc
(bottom) #2. Make sure to fix the feet to the
side where the metal nut is flush to the disc’s
surface (arrow below). It is important to identify
and fix the feet to the correct side.
Solar Warning! Do not point the telescope to the Sun, concentrated light will
cause irreversible eye damage and even blindness!
Figure 1. Exploded view of the complete assembly.
