XX-XX
PAGE X-X
ADS-AL(DL)-GM2
PAGE X-X
MODULE PrOgrAMMing PrOCEDUrE
8
Module Programming
Procedure completed.
7
Turn key to OFF position.
OFF
2
Insert key into ignition.
Wait 3 seconds.
4
Turn key to ON position.
Wait 3 seconds.
ON
3
Turn key to Accessory position.
Wait 3 seconds.
ACC
6
Release key from Start position
and return to ON position.
Wait, LED will turn solid GREEN
for 2 seconds.
ON
5
Turn key to Start position and
Hold for 3 seconds.
START
1
Close driver door.
Re-open driver door to wake up
data bus.
ADS-AL(DL)-GM2
73
ADS-DL-GM2 73
inSTALLATiOn MODE SELECTiOn
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
Page 10 of 11
OL-MDB-GM2
20120323
iNstall Guide
www.caralarm.com
omega research & development inc. © 2012
Doorlock Interface
GM
Doc. No.: ##8882##
