U.S. Patent No. 8,856,780
CARTRIDGE INSTALLATION
1
Slide cartridge into unit. Notice
button under LED.
2
Ready for Module Programming
Procedure.
8
Push start button once [1x] to
OFF position.
x1
Æ
MODULE PROGRAMMING PROCEDURE - WITH KLON - 1 OF 2
È
IMPORTANT: READ NEXT PAGE !
7
Wait, LED will turn solid RED.
3
Wait, LED will fl ash BLUE once
[1x].
x1
1
Close driver door.
Re-open driver door to wake up
data bus.
2
Press UNLOCK on keyfob 1.
6
Push start button twice [2x] with
keyfob 1 to ON position.
(No battery)
Æ
x2
9
Push start button twice [2x] with
keyfob 1 to ON position.
(No battery)
Æ
x2
4
Remove valet key from keyfob 1.
Æ
11
Push start button once [1x] to
OFF position.
x1
Æ
5
Remove batteries from keyfob 1.
Æ
10
Wait, if LED fl ashes BLUE
rapidly, proceed to step 11.
If LED turns solid RED, repeat
steps 8 to 10.
12
Disconnect all connectors from
remote starter except the power
connector.
13
Disconnect the power
connector.
Page 20 of 23
OL-BLADE-AL(DL)-CH7-EN
20160803
INSTALL GUIDE
Automotive Data Solutions Inc. © 2016
All in one
Chrysler/DoDge/Jeep/rAM
Doc. No.: ##29198##
