background image

4.3.7  Sensor Setup (continued)
Offset: 

If it is determined that the readings are slightly off, the user can manually assign

numerical values to adjust the readings for temperature (in ºC) , humidity (in

percentage), and barometric pressure (in mbar). The offset value can either be a positive

or a negative number with one decimal point.

Update: 

Saves changes

Reset Value: 

Ignores changes and puts previous values back in the fields.

Cancel: 

Ignores all the changes and goes back to the "Sensor Setup" page.

Reset Sensor: 

Reset the End Device readings and status.  If the End Device is not on

the network, the data will be cleared after about 3 minutes. Otherwise, the End Device

will reset itself and re-join the network after a minute.

Identify: 

INACTIVE: End device is in running mode and sending data to the Coordinator

periodically.  ACTIVE: End device is in identify mode and it keeps its blue LED on solid

so that operator can identify the corresponding sensor easily.

Once you click on the “Identity” button (“Active” Status) to locate your End

Device you need to make sure to click on the button again to make it “Inactive”;

otherwise the blue LED will stay solid until the battery is discharged.

Select Another Group

:  Go back to the group selection page to setup sensors.

Figure 4.17b  Sensor Parameters for Thermocouple Option

SENSOR PARAMETERS

Sensor #6, Group A

SENSOR PARAMETERS 

http://192.168.1.200

Address

Main Menu

Sensor Name

OVEN5

Select Another Group

Identify: INACTIVE

Reset Sensor

Cancel

Update

Periodic

10

Update

Reset Value

(seconds)

Offset1 (xxxx.x) 0

Offset3 (xxxx.x) 0

TC type

K type

TC type

K type

Cold Junction Compensation for Ch1

Cold Junction Compensation for Ch2

(C)

(C)

46

Summary of Contents for zED





























































































Reviews: