Omega VRT380 Series, Instruction Manual, Page: 9 / 28

5
WARNINGS AND CAUTIONS
WARNING
Hazards or unsafe practices which could result in serious personal injury or death.
DO NOT PLUG IN OR UNPLUG WITH WET HANDS.
It may cause an electric shock or an injury.
DO NOT USE WITH OTHER THAN RATED VOLTAGE.
It may cause an electric shock, a fire or abnormal performance.
It the voltage is different, it may shorten the life of the motor or cause a failure.
PLUG THE POWER CORD CORRECTLY AND PUSH IT TIGHT IN A WALL SOCKET.
Failing to do so may cause an electric shock or a fire.
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE
MANUFACTURER, AN AUTHORIZED SERVICE AGENTOR SIMILARLY QUALIFIED
PERSONS IN ORDER TO AVOID A HAZARD.
If the power cord is damaged, it may cause an electric shock or fire.
NEVER ALTER THE APPLIANCE. ALSO, DO NOT DISASSEMBLE OR REPAIR BY
YOURSELF. DO NOT INSERT FINGERS, FOREIGN SUBSTANCES OR OBJECTS
SUCH AS PINS INTO GAPS OR HOLES IN THE BASE.
It may cause a fire, an electric shock or a failure.
For any technical support, contact the authorized local Customer Care Center.
DO NOT MOISTEN THE BASE OR SPLASH WATER ON THE BASE.
Be careful not to let any liquids or other substances get into the switch.
DO NOT OPERATE THE SWITCH WITH WET HANDS.
It may cause an electric shock or fire.
WHEN THE POWER CORD WIRE IS BROKEN OR DAMAGED OR THE PLUG-IN
PART BECOMES LOOSE, DO NOT OPERATE IT.
It may cause an electric shock, a fire or an injury.
FOR SAFETY, A GROUND CONNECTION MUST BE USED.
It could cause an electric shock, a fire, a malfunction and an explosion.
Be sure to use the socket with ground connection.