Section 1 - Introduction
Please read this manual completely before installing and operating your
wireless connector/transmitter and receiver system. It’s important to read and
follow all notes, cautions, warnings and safety precautions before operating
this device. “Device” refers to your connector/transmitter or receiver unit.
Precautions
• This device is not designed for use in any medical or nuclear applications.
• Do not operate this device in flammable or explosive environments.
• Never operate with a power source other than the one recommended in this
manual or listed on product labels.
• This device has been designed for dry, moisture free indoor applications
only.
• Do not operate this device outside of the recommended use outlined in this
manual.
• No co-location with other radio transmitters is allowed. By definition,
co-location is when another radio device or it’s antenna is located within
20 cm of your connector/transmitter and can transmit simultaneously
with your UWTC unit.
• Never install UWTC connector/transmitters within 20 cm or less from each
other.
• Never install and/or operate your UWTC connector/transmitter closer than
20 cm to nearby persons.
• Never use your UWTC connector/transmitter as a portable device. Your unit
has been designed to be operated in a permanent installation only.
There are no user serviceable parts inside your device. Attempting to repair or
service your unit may void your warranty:
Safety Warnings and IEC Symbols
This device is marked with international safety and hazard symbols
in accordance with IEC standards. It is important to read and follow
all precautions and instructions in this manual before operating or
commissioning this device as it contains important information relating to
safety and EMC. Failure to follow all safety precautions may result in injury
and or damage to your device. Use of this device in a manner not specified will
void your warranty
IEC symbols
Description
Caution, refer to accompanying documentation
EU’s Waste Electrical and Electronic Equipment
Compliance
NOTE:
1
Introduction
1
