2
LCD FULL DISPLAY
OPERATION
(1) POWER ON/OFF
Short press” PWR
”
button to turn on the meter, press and hold for 2 seconds to turn off the meter.
(2) MAX/MIN/AVG
Short press
MAX/MIN
button to cycle display Maximum, Minimum, Average readings of Temperature and
RH since powered on.
(3) CHANGE DEGREE
℃
/
℉
Short press
UNIT
button to switch
℃
and
℉
.
(4) DP/WB/HI/WBGT
Short press
MODE
button to toggle current temperature, DP (Dew point), WB (Wet bulb temperate)
(THDP-10), HI (Heat index), WBGT(THDP-10-DL) at the second layer.
(5) FREEZE READING
Short press “
HOLD”
button under normal measurement, “
HLD
” icon shows on screen to freeze current
readings.
(6) DISABLE AUTO-POWER OFF
Meter will turn off automatically in 20 minutes when no use, to disable auto power off function, when meter
power off, press
HOLD+PWR
, LCD shows “n”, the auto power-off function is disabled.
(7) TURN ON/OFF ALARM FUNCTIONT
After setting up the threshold, short press
PWR
button, the bell icon shows on screen for alarm is activated.
Short press
PWR
button again to disable alarm function.
When it is under low power, the low battery icon shows on the screen, recommend to replace with new
battery.
(8) HI. LO ALARM SETTING
High, Low alarm threshold function:
( Meter is default Hi RH%: 70% , Lo RH%: 20%, Hi Temp.: 40
℃
,Lo temp: 10
℃
)
1. Press and hold
SET
button for 2 seconds, enter Temperature alarm setting.
First set up high temperature alarm, screen shows “SET HI”, the last digit ( decimal digit) at second
layer is flashing, short press
HOLD
button to increase,
BKLT
to decrease, select to left digit by pressing
MODE
(
←
) and to right digit by pressing
MAX/MIN
(
→
).
The last digit is flashing again for change selection.
2. Short
press
SET
button to toggle RH% or Temp. values setting, the last digit of RH% or temp. is
