17
En
gl
is
h
Manual & Self-winding watch
Operating instruction
2
2.
Annual calendar:
pull the crown out to position 2. Turn the
crown forwards to change the date or backwards to change
the month. Push the crown back to position 1.
Note:
the day following 28 or 29 February (depending on
whether it is a leap year), the date needs to be adjusted by one
or two days (crown in position 2). Ideally, the date should be
adjusted after setting the time.
3.
Time setting:
hours – minutes – seconds. Pull the crown out to
position 3, the seconds hand will stop. Turn the crown backwards
only. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Nb:
when changing the date backwards in time setting mode,
it is necessary to wind the hands back to 2pm to ensure the
date changes. Make sure the month has been set prior to
setting the time.
The crown has 3 positions, but only positions 1 and 3 are func-
tional for calibre 1120 jewellery version (fig. IV).
1.
Normal position (wearing position):
when the crown is
positioned against the case, the crown ensures that the watch is
water-resistant.
Occasional winding:
if the watch has not been worn for
48 hours or more (calibres 8520, 8521: 50 hours; calibre 1120:
44 hours), wind it up with the crown in position 1.
2.
Correcting the date:
pull the crown out to position 2, turn the
crown backwards and push it back to position 1.
Í
CAlIbrES 1120, 2500, 2520, 2610, 8520, 8521
(fig. I)
CAlIbrE 2627
(fig. III)
CAlIbrE 2300
(fig. IX)
Summary of Contents for Seamaster Aqua Terra Gold & Steel
Page 1: ...E 10...
