INST.No.INE-418-1P1CE
-20-
The following procedure is for the replacement of the temperature/humidity sensor being used for long period with a new one or
the replacement of the built-in type temperature/humidity sensor with the separated type sensor or the probe type sensor.
1) Pull out the temperature/humidity sensor from this meter.
7. Replacement of temperature/humidity sensor (Ref. [3.1 Overviews and functions])
Make sure to pull out the temperature/humidity sensor straight by holding its front and rear faces by two
fingers. Pins may be bended if it is not pulled out straight.
For disconnecting the separated type sensor or the probe type sensor from this meter, pull out it by holding the
connection part. Make sure not to pull out the cable. (Ref. [11. External dimensions])
<Built-in type RH32B>
<Separated type RH32S>
<Probe type RH32P>
Connection part
Hold here.
Cable
(*)
Pull out straight.
Pull out straight.
(*)
Don’t pull out the cable.
Ca u ti o n
Summary of Contents for RH32 Series
Page 1: ......