background image

Observe the (+) and (-) polarities when inserting the batteries.

Do not recharge the batteries.

Do not use batteries whose recommended period of use has expired.

Be sure to remove used batteries from the remote control.

Do not use batteries of different types at the same time and do not use new batteries with used batteries.

Do not solder the batteries.

Be careful not to short-circuit, disassemble, heat, or burn batteries. If the batteries are discarded incorrectly, they may
explode or leak, possibly resulting in burns or injury.

If your skin comes into contact with the battery fluid, rinse immediately with plenty of water. If liquid is flowing on devices,
wipe it to prevent direct contact.

Keep batteries out of reach of young children. If a child swallows a battery, consult a doctor immediately.

In case of unusual noises, stop using the device immediately and switch off the circuit breaker. If you continue to use
the product under these conditions, it may cause a fire or electric shock. Contact your dealer for service.

Be careful not to damage or modify the power cable. Be sure to connect the cable correctly and do not use a multi-plug
where other devices are connected. Otherwise, a fire may occur.

This device is not intended to be used by persons (including children) with reduced physical or mental abilities.

Children must be supervised so that they do not play with the device.

Check that the circuit breaker is correctly installed. Failure to install the circuit breaker properly may result in electric
shock. To check the installation method, contact your dealer or the authorized service technician who installed the unit.

If you use the appliance in a closed room or with other combustion appliances, ventilate the room regularly by opening
a window. Insufficient ventilation may result in asphyxiation due to a lack of oxygen.

Avoid  using  the  device  for  a  long  time  in  an  excessively  humid  environment  (where  the  humidity  is  above  80%),
especially when windows and doors are left open. Condensation may be formed in the indoor unit and water may flow
on your furniture, which may damage the unit.

In case of prolonged disuse, turn off the switch or disconnect the main circuit breaker.

It is recommended to entrust the maintenance of the device to a specialist in case of prolonged use.

At least once a year, check if the mounting table of the outdoor unit is damaged. If you do not perform this check and
the table is damaged, the unit may fall and injure someone.

Use a stable and sturdy ladder to install / remove the front panel / air filter. Otherwise, you risk to fall and injure yourself.

Do not hang on the outdoor unit and do not place any object on it. This may indeed tip over or fall, and you could hurt
yourself. Damage to the unit may cause electric shock or fire.

Do not use combustion equipment directly in the airflow of the air conditioner. Poor combustion can lead to asphyxiation.

Check that the water is properly drained. If the exhaust system is clogged, leakage may occur and water may damage
your  furniture.  To  verify  that  the  installation  method  used  is  correct,  contact  your  dealer  or  the  authorized  service
technician who installed the unit.

Do not place any containers filled with liquids, such as vases, on the apparatus. Otherwise, the liquid in the container
may get inside the unit and damage the electrical insulator, which may cause an electric shock.

Do not place any other electrical appliance or furniture under the unit. Drops of water could fall on them, which could
damage the furniture or the appliance.

Be careful not to place animals or plants directly in the airflow of the air conditioner. This can affect the health of the
animals or plants.

Do not place objects near the outdoor unit and regularly clean dead leaves that fall around. Dead leaves attract small
animals, which can come into contact with the electrical components of the appliance, which may cause a malfunction
or fire.

Do not use the appliance for other purposes than the one designed, such as for storing food or animals, or as a support
for plants, precision appliances or art works. Do not use the unit in a boat or other vehicle as this may cause the unit to
malfunction or damage the vehicle. When you clean it, you must turn off the power and turn off the breaker. Since the
internal blower can turn at high speed, you could hurt yourself.
Do not clean the main unit with water as this may cause an electric shock.

After cleaning the front panel or air filter, carefully wipe off any splashing water and let it dry. The presence of water
may cause an electric shock.

After removing the front panel, do not touch the metal parts of the unit. You could hurt yourself.

Do not touch the air intake section or aluminum fins of the unit. You could hurt yourself.
If thunder rumbles and lightning announces a thunderstorm, stop using the device and turn off the breaker.
Lightning may cause a malfunction.

BATTERY REMOTE CONTROL 

Summary of Contents for OTEC ICHH Series




















Reviews: