background image

2

CAUTION

• Do not use the unit near any device which generates strong electromagnetic radiation

or near a static electrical charge, as these may cause errors.

• Do not use the unit where it may be exposed to corrosive or explosive gases. The unit

may be damaged, or explosion may occur.

• Do not keep or use this unit in an environment where it will be directly illuminated by

sunshine, or where it will be exposed to high temperatures, high humidity or conden-
sation. If you do, it may be deformed, its insulation may be damaged, or it may no longer
function according to specification.

• Do not point the lens at the sun or at any other source of strong light. If you  do, the sensor

may be damaged.

• Do not contact the lens against the object whose temperature is to be measured, or get

it dirty, allow it to be scratched, or allow any foreign material to adhere to it. Doing so
may cause errors.

• Do not touch  or hold by the front cone. Temperature reading can be affected by heat

from hand.

• Do not place the meter on or around hot objects (70°C/158°F). It may cause damage

to the case.

• If the meter is exposed to significant changes in ambient temperature (hot to cold or cold

to hot). Allow 20 minutes for temperature stabilization, before taking measurement.

• Condensation may form on the lens when going from a cold to hot environment-wait 10

minutes for conden sation to dissipate before taking measurements.

• This unit is not constructed to be water proof or dustproof, so do not use it in a very dusty

environment or in one where it will get wet.

Summary of Contents for OS642C-LS

















Reviews: