background image

 

- 2 -

1. GENERAL

 

A)  Carefully read the following important information regarding installation safety and 

maintenance. Keep this information booklet accessible for further consultations. 

B)  The appliance has been designed as a exhausting version (external exhaust) or as a 

filter version (inter air recycle) cooker hood. 

 

2. SAFETY PRECAUTION 

A)  Take care when the cooker hood is operating simultaneously with an open fireplace or 

burner that depend on the air from the environment and are supplied by other than 
electrical energy, as the cooker hood removes the air from the environment which a 
burner or fireplace need for combustion. 

B)  The negative pressure in the environment must not exceed 4 Pa (4*10-5 bar). 
C)  Provide adequate ventilation in the environment for a safe operation for the cooker 

hood. 

D)  Follow the local laws applicable for external air evacuation 
E)  Appliance shall only be used with rated voltage and frequency. 
F)  There is a fire risk if cleaning is not carried out in accordance with the instruction. 

 

3. WARNING!! 

In certain circumstances electrical appliances may be a danger hazard. 

A)  Do not check the status of the filters while the cooker hood is operating. 
B)  Do not touch the light bulbs after appliance use. 
C)  Do not disconnect the appliance with wet hands and without to force the supply 

cord.. 

D)  Flame cooking is prohibited underneath cooker hood. 
E)  Avoid free flame, as it is damaging for the filters and a fire hazard. 
F)  Constantly check food frying to avoid that the overheated oil may become a fire 

hazard . 

G)  Disconnect the electrical plug prior to any maintenance. 
H)  Children don’t recognize the risks of electrical appliance. Therefore use or keep 

the appliance only under supervision of adults and out of the reach from 
children.

 

 

4. INSTALLATION INSTRUCTIONS   

Way one: 
4.1 The cooker hoods should be placed at a distance of 65-75cm from the cooking surface 

for best effect.   

4.2 To install onto the wall drill 2 holes of Ø8mm on a suitable place according with the 

centre distance of hole in the back of the cooker hood. 

4.3 Insert the nut into the holes. 
4.4 Insert the screws into the nuts and tight. 
4.5 Put up the cooker hood onto the tighten screws. 

Reviews: