background image

2

GENERAL INFORMATION

Please read this booklet thoroughly before you use this appliance. It is important that you understand all the
control functions before commencing to cook with your new appliance.

Please remember the advice and warnings shown in this manual which is headed
‘IMPORTANT – Warning and Safety Instructions’.

This appliance is designed for domestic household use and can be built into a standard kitchen cabinet or
housing unit.
NOTE: The adjacent furniture or the housing and all materials used in the installation must be able to withstand a
minimum temperature rise of 85C above ambient during periods of use.
Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage or discolouration at
temperatures below the above guidelines.
Installing the appliance in contravention of this temperature limit or the placing of adjacent cabinet materials
closer than 4mm to the appliance, will be at the liability of the owner.

The use for any other purpose or in any other environment without the express agreement of
the manufacture or its agent, would invalidate any warranty or liability claim

Your new appliance is guaranteed against electrical or mechanical defects subject to certain exclusions noted in
the Conditions of Guarantee.
The aforegoing does not affect your statutory rights.

Before using this appliance ensure that any protective packaging or coatings have been removed. To aid the
protection of the environment, please sort the packing materials into different types and dispose of them in
accordance with the local waste disposal laws.
Any further information on waste disposal can be obtained from your local Environmental Agency office.
When first used, an odour may be emitted by any residual protective finish or moisture, which will cease after a
short period of time.

This Appliance has been Constructed and Distributed in compliance with the essential requirements of the
following EEC DIRECTIVES and EUROPEAN NORMS:-

CE Marking – 93/68 Low Voltage – 73/23 EMC – 89/336
Safety Standards – EN 60 335-1, EN 60 335 – 2 – 6, ASNZS3350-1, AS/NZS3350-2-6

As we have a policy of continued product improvement, the right is reserved to adjust and make any
modifications deemed necessary without notification.

Summary of Contents for OO610XA













Reviews: