USING THE DIGITAL TIMER
Time of Day Adjustment:
The time must be adjusted before starting to use the oven. Following power supply to the oven, the decimal
point will flash. While the decimal point is flashing, use the (+) and (-) buttons to adjust the current time (24
hour clock). When finished, leave the buttons for 5 seconds until the decimal point stops flashing (which
indicates the time is set). To reset the clock any other time, press the Program button once (from manual
mode) until the decimal point flashes, and then adjust as above.
Once the time adjustment has been made, the oven is ready to be used in manual mode or a timer set up.
Setting the minute minder function:
The minute minder function allows you to set up an alarm that will go off after a set period of time. This will
not affect the operation of the oven in any way. It does not need an oven function to be selected to be used
(but the current time should be set).
First, press the Program button until the Minute Minder indicator (9) starts to flash and the LED display shows
a time of 00.00 (press twice from manual mode). Use the (+) and (-) buttons to adjust the time (in hours &
minute – HH:MM). Once the desired time has been set, leave the buttons for 5 seconds and the Minute
Minder indicator (9) will stop flashing, indicating that the minute minder is now in operation. The time will
count down in minutes until the last minute, then count down in seconds. When the countdown has finished
an audible alarm will start. The alarm can be turned off by pressing the Program button again. Note that
during the operation of the minute minder, the length of time can be adjusted at any point repeating the
steps above (which will then display the time left on the countdown) and adjusting using the (+) and (-)
buttons. To disable the minute minder, adjust the time back down to 00:00. The maximum time that can be
set is 23 hours, 59 minutes.
Setting the cooking duration function:
The cooking duration function allows you to set the oven to cook at a pre-set cooking function for a set length
of time, after which the oven will turn off. Select the desired temperature & oven functions with the control
knobs (the oven will start to work). Press the Program button until the timer function cycles past the minute
minder and the Auto Function indicator (7) and Manual Function indicator (8) start to flash (the LED should
show the cooking duration, which is 0.00). While the two indicators are flashing, adjust the cooking duration
using the (+) and (-) buttons (10 hours maximum). When the correct duration has been set, leave for 5
seconds until the two indicators stop flashing and the LED displays the current time.
The cooking duration can be checked and then adjusted at any point repeating the steps above (which will
then display the time left for the cooking duration) and adjusting using the (+) and (-) buttons. To cancel,
adjust the time back to 0.
When the time has run out on the cooking duration, the oven functions will turn off, the audible alarm will
sound and the two indicators will flash. Turn off the oven functions. Press the Program button once to turn the
alarm off.
13
13
Summary of Contents for OO60B
Page 2: ......
