11
User Manual
Designed to Enhance
OHPD800W
Care & Maintenance
Tips for Cleaning Your Dryer
Clean the dryer with a clean, damp cloth only. Do not use any
solvent, abrasive cleaners, glass or all-purpose cleaners, as
these sprays can damage plastic surfaces and other parts.
Always wear gloves while cleaning to maintain safety.
For best results prepare a clean, damp cloth. Clean the door,
especially the inside window. Next clean the sealing around the
door opening, followed by the humidity sensor inside the drum.
Following the guide included on this page, remove the lint filter
and clean it as instructed. Finally, before starting the dryer
ensure you dry all parts using a separate, soft and dry cloth.
Emptying the Water Container
1. Gently pull out the water container, making sure to keep it
level with both hands.
2. Next, slowly tilt the water container over an empty sink to
pour out the condensate water. Gently reinstall the water
container once it has been fully emptied.
WARNING:
Always empty the water container after each use.
Once the water container is filled completely, the program will
be paused and the ‘Empty Water Container’ icon will light. After
the container is emptied, the dryer can be restarted by pressing
‘Start/Pause’ button.
WARNING:
Do not under any circumstances use the dryer
without the water container. Never drink the condensate water.
Cleaning the Lint Filter
1. To clean the lint filter, first open the dryer door. You will notice
the built in lint filter at the base of the opening, which can be
easily lifted up.
2. Next open up the filter gently, and using your hands, a soft
brush or a small vacuum remove the lint on the filters. If the
lint is particularly dusty, you can use water to help.
3. Take extra notice of the correct orientation of the filter before
reinserting. Ensure the filter is dry before reinstalling.
WARNING:
The lint accumulated on the filter will block air
circulation inside the dryer. Not cleaning the filter regularly will
increase the time it takes for clothes to dry, and increase energy
consumption. Ensure you clean the filter at least once a week.
WARNING:
Never under any circumstances should you operate
the dryer without the lint filter equipped.
Cleaning the Heat Exchanger
Every 6 months, lint from the heat exchanger must be removed
using a vacuum cleaner with a dusting brush attached, using
very little pressure. If the exchanger has not been cleaned, it
can eventually be damaged and the appliance will not dry.
WARNING:
Do not touch the heat exchanger directly with your
hands as it may cause injuries.