Omega ODWF6014BX, User Manual, Page: 14 / 32

14 ODWF6014BX, ODWF6014X User Manual
Operation Instructions
(Continued)
Starting a Wash Cycle
1. Draw out the lower and upper basket, load the dishes
and push them back. It is recommended to load the lower
basket first, then the upper one.
2. Add the detergent.
3. Insert the plug into the socket. The Power supply refer to
the Product Specifications table on page 07.
4. Ensure that the water supply is turned on to full pressure.
5. Close the door and press the Power button to switch on
the machine.
6. Select a program and the corresponding indicator light
will illuminate. Then press the Start/Pause button, the
dishwasher will start its cycle.
Changing the Program Mid-Cycle
A wash cycle can only be changed if it has been running for
a short time otherwise, the detergent may have already been
released and the dishwasher may have already drained the
wash water. If this is the case, the dishwasher needs to be
reset and the detergent dispenser must be refilled. To reset
the dishwasher, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Press program button for more than 3 seconds.
The program will cancel.
3. Press the program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds,
the dishwasher will start.
Adding a Dish Mid-Cycle
A forgotten dish can be added any time before the
detergent dispenser opens. If this is the case, follow
the instructions below:
• Press the Start/Pause button to pause the washing.
• Wait 5 seconds then open the door.
• Add the forgotten dishes.
• Close the door.
• Press the Start/Pause button after 10 seconds,
the dishwasher will start.
WARNING:
It is dangerous to open the door mid-cycle,
as hot steam may scald you.