Insert the drain hose into a d rain pipe with a m inimum diameter of 40mm, or let it run into the sink, making sure to
avo id bending o r crimping it. The top of the ho se must be less than 100 0mm.
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
φ
40mm
B
A hose that a ttaches to a sink spray can burst if it is installed on the same water line as th e dishwasher. If your sink has
one, it is recommended thet the ho se b e d isco nnected and the hole plugged .
Pull The safety supply hoses completely out from storage compartment located at rear of dishwasher.
Turn water fully on before starting the dishwasher.
1
Tighter the screws of the safety supply hose to the faucet with thread 3/4inch.
The safety supply hose consists of the double walls. The hose's system guarantees i ts intervention by blocking the
f low of water in case of the supply hose bre aking and when the air space between the sup ply hose itself and th e ou ter
corrugated hose is full of water.
Turn off the water.
Release the water pressure by depressing the pressure release button. This relieves water pressure and protects you, and the
room, from severe splashing.
Unscrew The safety supply hose from the faucet..
3
2
1
2
3
The appliance m ust be conne cted to the water mains using new hose-sets.
The old hose -sets should not be reused.
Wate r pressu re must be b etween 0,04 MPa and 1 MPa. If the pressure is be low the minimum
consult our S ervice D epa rtment for advice.
Connect the cold wate r supply hose to a threaded 3/4(inch) conn ector and make su re that it is fastened tightly in place.
If the water p ipes are new or have not been used for an e xtended period of time , let the water ru n to make sure that th e
wate r is clear and free of impurities. If this preca ution is not taken, there is a risk th at the water inlet can get blocked
and damage the appliance.
The water su pply to the appliance can also be connected to the house hot water lin e (centralized system, he ating
system),as long as it does not exceed a temperature of 60 C. In this ca se, the wash cyc le time w ill be sho rten ed by
abo ut 15 min utes and the wash e fficiency slightly redu ced.
The connection must be m ade to the hot water line following th e sa me proce dures as tho se for the connection to the
cold water line.