manualshive.com logo in svg

Omega ODW702X, Instruction Manual, Page: 9 / 24

Share
Download
Omega ODW702X Instruction Manual Download Page 9

 

6 

 

Quick Operating Quide 

Switch on the appliance. 

Open the door, press the On/Off button to switch on the appliance. 

Fill the detergent dispenser. 

Compartment A: 

For each wash cycle. 

Compartment B: 

For programs with pre-wash only.  

(Follow the user instructions) 

Check the rinse aid level. 

Mechanical indicator C. 

Electric indicator on control panel (if provided). 

Load the baskets. 

Scrape off any large food particles. Soften remnants of burnt food in 

pans, then load the baskets. Refer to the dishwasher loading 

instructions. 

Select a program. 

Close the door, press the Program button until the selected program 

lights up. 

Running the dishwasher. 

Turn on the water tap and press the Start/Pause Button. The machine 

will start working after about 10 seconds. 

Changing the program. 

1. A running cycle can only be modified if it has been running for a 

short time. Otherwise, the detergent may have already been 

released and the water already drained. If in this case, the detergent 

dispenser must be refilled. 

2. Press the Start/Pause button, the machine will be in standby state, 

press the program button more than 3 seconds then you can 

change the program to the desired cycle setting. 

3. Press the Start/Pause Button, the dishwasher will run after 10 

seconds. 

Adding forgotten dishes to 

the dishwasher. 

1. Press the Start/Pause Button to stop the washing. 

2. Open the door a little. 

3. After the spray arms stop working, you can open the door 

completely. 

4. Add forgotten dishes. 

5. Close the door. 

6. Press the Start/Pause Button, the dishwasher will run after 10 

seconds. 

Warning:

 Open the door carefully as hot steam may be released. 

If the appliance is switched 

off during a wash cycle. 

If the appliance is switched off during a wash cycle, when switched on 

again please re-select the washing cycle and operate the dishwasher 

according to the original Power-on state. 

Switch off the appliance. 

When the working cycle is finished, the buzzer of the dishwasher will 

sound 8 times, then stop. 

Turn off the appliance using the On/Off Button. 

If the appliance was under standby mode, it will power off automatically 

after 30 minutes without any operation. 

Turn off the water tap, unload 

the dishes. 

Warning

: Wait a few minutes (about 15 minutes) before unloading the 

dishwasher to avoid scalding, as the dishes and utensils are still hot 

and more susceptible to breaking. 

Unload the appliance, starting from the lower basket. 

 

 

 

Summary of Contents for ODW702X

























Reviews:

No comments