Omega ODD614X, Instruction Manual, Page: 37 / 44

Spray arms
If you are in a hard water area, it is necessary to clean the spray arms regularly for
hard water chemicals will clog the spray arm jets and bearings.
To clean the spray arms, follow the instructions below:
2
Slightly tilt the arm and remove it
from under the basket.
33
1
With one hand raise the basket slightly,
and with the other hand reach under
the basket.Hold the spray arm and
lift it up.
3
Wash the arms in soapy and warm
water and use a soft brush to clean
the jets. After cleaning, replace it in
the opposite direction.
Caring For The Dishwasher
Frost precaution
If you live in a region that is where the inside temperature can drop below zero, care
needs to be taken to avoid possible damage if the water in the dishwasher freezes.
1.
Turn off the mains power to the dishwasher.
2. Turn off the water supply and disconnect the Water Inlet Hose. Drain the water
inside the hose then reconnect.
3.
Remove the coarse filters in the tubs and soak up all water possible with a sponge.
Then re-assemble.
Cleaning
Only use gentle cleaning products on the exterior of the dishwasher, no solvents or
abrasive compounds.
Products specifically for cleaning the stainless steel interior are effective in restoring the
original bright interior.
34
Long term storage
Disconnect the power supply and the water supply.
Remove the coarse filters and soak up all water possible with a sponge.
This reduces the chance of any odors developing inside the tubs.