11
Operating Instruction
The basic layout of the induction cooktop is shown in the diagram below.
The induction cooktop appliance is operated by touching buttons, with the functions confirmed by LED
displays and acoustic signals.
Turning On and Turning Off the Cooktop Appliance
NOTE: Do not operate the cooktop without first placing a suitably sized cooking vessel containing food on the
appropriate cooking zone. Missing or incorrectly sized cookware will cause the “U” fault to be displayed on
the Heat level display (cooking zone off). Turn off the cooking zone or replace cookware to continue cooking.
If the appliance is in
Stand-By-Mode,
it is put into
Operating-Mode
by pressing the
On/Off
button for at least 1
second. A beep signal indicates the successful operation acoustically.
On all Heat Level Displays a ´0` will appear and all
Decimal Points
of the Heat Level displays will flash (1
second on, 1 second off).
If there is no operation within 20 seconds, all the Heat Level Displays will automatically turn off. If the displays
are turned off, the hotplates will be re-set into
Stand-By-Mode
.
If
On/Off
is pressed for more than 2 seconds (in
Operating-Mode
), the appliance is switched off and is set into
the
Stand-By-Mode
again. The appliance can be turned off by pressing
On/Off
at any time; even if other
buttons are pressed simultaneously.
If there is a residual heat of a hotplate remaining, this will be indicated in the correspondent heat setting Heat
Level
Display as a red “H”
.
.
Summary of Contents for OCI64
Page 1: ...Instruction Manual Induction Cooktop Model OCI64 ...
Page 17: ...1 ...
