background image

 

 

      

 
IMPORTANT SAFETY INSTRUCTIONS 

 
 

IMPORTANT: 

Read the assembly instruction section and safety precautions of this booklet 
carefully before removing the contents of this carton. 

 

1.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience or knowledge, unless they have been given supervision or 

instruction concerning the use of the appliance by a person responsible for their safety.  Children should 
be supervised to insure that they do not play with the appliance.   

2.

 

In certain circumstances electrical appliances may be a danger hazard.  The unit MUST be connected to 

the electrical supply before operation to enable the electronic ignition to work. 

3.

 

Do not place heavy objects on this appliance. 

4.

 

Damage can occur to bench tops if pots and pans are able to overlap the bench top. This can result in 

heat being transferred to the bench top. Ensure that correct sized pots & pans are used. Refer to guide in 
booklet. 

5.

 

Do not allow pot handles or utensils to be placed near gas burners which are operating, as they can cause 

the handles to become hot to touch. Always turn handles away when small children are nearby. It is 
recommended that children are kept away from the cooktop at all times. 

6.

 

This appliance is not suitable for connection with a hose assembly. 

7.

 

If the electrical supply cord is damaged, either when being installed or after installation, it must be 
replaced by the manufacturer, it’s service agent or similarly qualified persons in order to prevent a hazard. 

8.

 

The electrical connection must be accessible after installation. 

9.

 

Electrical connection must be made as per local wiring rules and regulations. 

10.

 

Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking on the gas 

cooktop.  

11.

 

Do not store or use flammable materials or aerosols near the cooktop. 

12.

 

WARNING - The cooktop will become hot during and directly after use. Do not touch any components 
during this time, as they may be hot and can cause burns. 

13.

 

Cleaning may only be commenced on the appliance once it has cooled down.  

14.

 

When the appliance is not being used, the knobs must be kept in the ‘OFF’ position. 

15.

 

Not to be used in a marine environment. 

16.

 

Not for use in marine craft, caravans or mobile homes. 

17.

 

Do not modify this appliance. 

 

 

 

 

 

 

    

 

 

 

 

DO NOT    

OPERATE THIS APPLIANCE BEFORE READING THE  
INSTRUCTION BOOKLET 

   

 

 

DO NOT     

PLACE ARTICLES ON OR AGAINST THIS APPLIANCE 

    

 

 

DO NOT 

STORE CHEMICALS OR FLAMMABLE MATERIALS OR  
SPRAY AEROSOLS NEAR THIS APPLIANCE 

 

   

 

 

 

 

 
 
 
 

 

Summary of Contents for OCG61XA













Reviews: